Scientific Program (preliminary)

Program for Thursday 01, June 2017 (preliminary)

10:00 – 11:30 Registration and Poster Set Up / registration desk
11:45 – 12:45 Welcome Lunch
12:45 – 13:00 Welcome & Opening Remarks (Prof. Dr. Johannes Janicka/ Prof. Dr. Andreas Dreizler)

Session 1: Flame-Wall Interaction modeling and Simulation (Ass. Prof. H. Ström)

13:00 – 14:00 Christos Frouzakis, Dr., Institute of Energy Technology, Dept. of Mechanical and Process Engineering, ETH, Zürich, Switzerland:
Premixed flame propagation in confined geometries and flame-wall interactions: a DNS study
14:00 – 14:30 S. Ganter, A. Sadiki, J. Janicka: Laminar near-wall combustion: Analysis of tabulated chemistry simulations by means of detailed kinetics
14:30 – 15:00 C. Straßacker, U. Maas: Reduced kinetic models for combustion processes close to walls
15:00 – 15:30 Coffee/Tea Break – check in to hotel rooms

Session 2: Exhaust after-treatment systems in automotive technology (Dr. Ch. Frouzakis)

15:30 – 16:30 F. Birkhold, Dr., Diesel Systems, Engineering Technical Information Processing, Simulation (DS/ETI1), Robert Bosch, GmbH, Germany: Wall phenomena at the AdBlue preparation in automotive SCR systems
16:30 – 17:00 M. Börnhorst, O. Deutschmann: Spray/wall-interaction and deposit formation in ammonia selective catalytic reduction systems
17:00 – 18:00 H. Ström, Ass. Professor, Chalmers Gothenburg, Multiphase flows in industrial processes related to energy production, Sweden: Near-wall dispersion, deposition and transformation of particles in automotive exhaust gas aftertreatment systems

Session 3: Posters

Remark: Posters related to all topics in sessions 1, 2, 4-6 including various applications)

18:00 – 19:30 Poster Session
19:30 – 20:30 Dinner
20:30 – 21:30 Poster Session

Program for Friday 02, June 2017

07:00 – 08:00 Breakfast

Session 4: Fuel Spray-Wall Interactions, Film Evaporation and Deposition (Prof. Dr. Ing. C. Tropea)

08:00 – 09:00 António Luis Moreira, Associate Professor, Director of the Center for Innovation, Technology and Policy Research, Portugal Towards Physical Modeling Thermal-and Fluid Dynamics of Spray Wall Impingement
09:00 – 09:30 H. Kittel, C. Tropea, I. Roisman: Drop impact onto a wall film of different fluids
09:30 – 10:00 A.B. Abai, O. Deutschmann: Modelling and numerical Simulation of multiphase chemical reaction in after-treatment systems
10:00 – 11:00 Coffee/Tea Break

Session 5: IC engine flow and heat transfer processes (Ass. Prof. António Moreira)

11:00 – 12:00 Yoshihiro HOTTA, Dr., Reacting Fluid Dynamics Lab., Toyota, Japan: Innovative Heat Insulation Approach “TSWIN” for a Combustion Chamber Wall, and its Verification with Laser-induced Phosphorescence Temperature Measurement Technique
12:00 – 12:30 C. P. Ding, B. Boehm: Experimental characterization of in-cylinder near-wall flow and combustion processes
12:30 – 13:00 P. Forooghi, F. Magagnato, B. Frohnapfel: DNS of flow and heat transfer over rough walls
13:00 – 14:00 Lunch

Session 6: Measurement techniques and Diagnostics (near wall) (Prof. Dr.-Ing. J. Janicka)

14:00 – 15:00 A. Dreizler, Prof. Dr., Dept of Mechanical and Process Engineering, Institute of Reactive Flows and Diagnostics, TU Darmstadt, Germany : Wall-bounded flames : Impact on flow and scalar fields
15:00 – 15:30 K. Hidemasa, A. Dreizler: Experimental characterization of quenching distance and wall-heat flux during side-wall quenching in dependence of wall temperature
15:30 – 16:00 Closing Discussion
16:00 End of Program
  Airliner to Darmstadt Main Station and to Frankfurt Airport